FOGMASTER VECTRA-JET ULV 7505

Free Shipping to the Lower 48 States

Designed for aggressive chemicals

The Vectra-Jet™ 7505 fogger can apply a thin (or thick) layer of sanitizing or disinfecting chemical to control undesirable microorganisms in clean rooms, packaging lines, storage areas, emergency vehicles, shipping containers and the like.

The machine pulls chemical solution from a 1-gallon reservoir and discharges it as a fog of fine droplets. The powerful discharge carries the fog plume a distance of 35- 50 ft and creates eddies that spread it laterally. 

Carry it by hand, place it on a table or stool. You can control fog timing manually.

The Vectra-Jet ULV was designed with disinfection applications in mind.  Droplet size is adjustable with the 9-turn valve, down to very small droplets that float widely, resist settling and penetrate tight spaces.  A high efficiency intake filter protects the motor from chemical droplets suspended in the air. 

The Vectra-Jet uses corrosion resistant materials, such as stainless steel (for fittings, valve and liquid reservoir), Viton® rubber (for tubing and O-rings) and Celcon® acetyl copolymer (for nozzle components).  Units can also be specified with HDPE or stainless steel nozzle elements for extra protection when applying strong oxidizers like peracetic acid, hydrogen peroxide or gluteraldehyde.

 

Motor	1 Hp, 50/60Hz 750510: 120V, 7 amp
Fogging Nozzle	High-shear, counter-rotating vortex design
Intake Filter	High efficiency cartridge type intake filter captures 99+ percent of 5µ droplets. Replaceable filter element.
Particle Size	7-30 micron VMD, adjustable (ultra fine, dry fog to heavy, wet fog)
Liquid Flow Rate	0-10 oz/min [0-300 ml/min]  Nine turn vernier valve Valve lock feature
Chemicals	Water- or oil-based solutions
Tank Capacity	1 gallon [4 liters]
Materials of  Construction	Power head housing - aluminum Tank - stainless steel Fittings - stainless steel Control valve - glass filled nylon, stainless stem, Tubing - Viton  Seals - Viton Tank gasket - Buna N Nozzle - Celcon acetyl copolymer
Optional Materials	HDPE or stainless steel nozzle elements
Regulatory Compliance	UL, CSA, CE, PSE
Dimensions	H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]
Shipping Weight	14 pounds [6 kg]
Warranty	One year